Door Lock Release Triggering Time; Flash Detection Mode - Bpt IT/200 Manual De Instrucciones

Door lock release triggering
time
Lift the receiver
or
press the hands-free key.
Following this operation, a double tone
should sound, prompting you to commence
programming.
2 8
Key in 28.
Key in the door lock release
3
2
1 6
triggering time (in the range
5
4
9
8
7
01 to 15 seconds), e.g. 06
0
for 6 seconds.
Once finished, you should hear a triple tone
confirming the setting.
Replace the receiver
or
press the hands-free key.
NOTE. This function can only be used with
power suppliers with no centralized timers
(e.g. A/200R or VA/100.
solenoid lock release control).
PROGRAMMING
set for manual
01
32

Flash detection mode

Lift the receiver
or
press the hands-free key.
Following this operation, a double tone
should sound, prompting you to commence
programming.
0
2 Key in 20.
Press 0 for type approved
0
flash detection
or
1 for long flash detection.
1
Once finished, you should hear a triple tone
confirming the setting.
Replace the receiver
or
press the hands-free key.