Connections - Bpt IT/200 Manual De Instrucciones

In order to access the terminals, remove the
terminal covers. The use of a 6/10 telepho-
ne cable is recommended for connecting
the telephones.
The maximum distance between the
telephone interface and the telephone is
100 m.
NOTE. The unit must be connected on ana-
logue telephone lines only and not digital
ISDN lines.
Functions of each terminal
Terminal block T (telephone line)
ae local line
be local line
au telephone
bu telephone
Terminal block C (from power supplier)
5 earth
6 monitor power supply input
7 call
8 audio from entry panel
9 audio to entry panel
12 porter call
22 auxiliary/stair light
Terminal block M (to receiver)
5 earth
6 monitor power supply output
7 call
8 audio from entry panel
9 audio to entry panel
Terminal block A
~
mains
~

CONNECTIONS

Fig. 2
27
ON
ON
SW1
OFF 1 2 3 4 5 6
T M
A C