Handset Ringer; Pulse/Tone; Flash; Mute - Clarity C4210 Guia Del Usuario

FEATURE SET UP

Handset Ringer

Set the switch marked Ringer OFF/VIBE/ON located
on the side of the handset.When VIBE is selected
the handset will ring and vibrate when receiving and
incoming call. The ringer switch must be set to ON
or VIBE for the handset
to ring.
Note: If both handset and base ringers are set to
OFF, the visual ringer will flash to indicate there is an
incoming call.

Pulse/Tone

Slide the switch to the type of telephone service you
have;TONE for touch-tone service or PULSE for
rotary dialing. Please check with your local telephone
company if uncertain of the type of service.

Flash

The FLASH button is activated to use custom calling
services such as Call Waiting or Three-Way Calling.
Please contact your local telephone company for
information on these services.

Mute

The MUTE button allows the user to conduct a
private conversation that you do not want the
person on the other end to hear.While in the mute
mode, the MUTE button will illuminate RED and the
microphone in the handset is disabled. Pressing the
MUTE button again will disengage the MUTE feature.

Redial/Pause

Press the RD/P button to redial the last number
dialed. Pressing the RD/P button while storing a
telephone number will insert a four (4) second
pause. This is commonly used when storing both the
telephone number and an extension or PIN number.
20
FEATURE SET UP
TELEPHONE BASE

Ringer Volume

The base ringer volume adjustments are located on
the side of the telephone base.
Pressing the UP ( ) key on the base increases the
▲
ringer sound by one level while pressing the DOWN
( ) key reduces the sound by one level.There are a
▼
total of six levels from maximum to minimum.The
ringer will sound for two (2) seconds while choosing
a ringer volume, to allow the user to make a choice.

Ringer Style

The base ringer style adjustments are located on the
side of the telephone base.The style of ring can be
adjusted by pressing the RING STYLE button. Six (6)
styles are available allowing you to customize your
ring. The ringer will sound for two (2) seconds while
choosing a ringer style, to allow the user to make a
choice.

Visual Ringers

Visual ringers are located in both the handset
antenna and the base of the telephone.When an
incoming call is received, these lights will flash.The
handset visual ringer will also stay lit while the phone
is in use.
BOOST ON/OFF Switch
This switch will disable the reset feature of the
BOOST Clarity Power button as follows:
ON – When the BOOST ON/OFF switch is set to
ON, the Boost function will be ON every time a call
starts, and will default to ON every time the phone
hangs up. During a call, the BOOST Clarity Power
button can toggle the Clarity Power ON or OFF
according to the user's needs.
21