Using Your Tv; Turning The Power On And Off - Insignia NS-20CLTV Guia Del Usuario

Insignia NS-20CLTV 20" Combo DVD/LCD TV
To connect a standard S-Video source to
AV1 jacks:
1 Connect an S-Video cable (3) to a standard
video source (1) and the back S-VIDEO
jack (5).
2 Connect RCA audio cables (4) to the
source's audio output jacks and the back
AUDIO L and R jacks (5).
3 Press the INPUT button and the
buttons to set the TV's signal input to
S-Video.
Connecting to a component video source
1
2
INPUT 1
S-VIDEO
VIDEO
INPUT 3
C P
R / R
C P
B / B
Y
3
To connect a progressive-scan or HDTV
video source to Y/Pb/Pr jacks:
1 Connect component video cables (2) to a
progressive-scan or HDTV video source (1)
and the back Y/Pb/Pr jacks (3).
2 Connect RCA audio cables (4) to the
source's audio output jacks and the lower
AUDIO L and R jacks on the back panel (3).
3 Press the INPUT button and the
buttons to set the TV's signal input to YPbPr.
R
AUDIO
L
L
AUDIO
R
www.insignia-products.com
Connecting to a computer
RF
INPUT
4
To connect a computer video source to the
VGA jacks:
1 Remove the port cover on the back of the
TV (1).
2 Connect a VGA cable (2) from the
computer (4) to the VGA INPUT port on
the TV.
3 Connect a male-to-male audio cable (3) from
the computer (4) to the AUDIO VGA INPUT
port on the TV.
4 Press the INPUT button and the
buttons to set the TV's signal input to PC.
Note
The best resolution for displaying computer video
on this TV is 1280 × 768.

Using your TV

Turning the power on and off

To turn the power on and off:
1 Press the POWER button on the side panel
of the TV or on the remote control. The
POWER/STANDBY indicator turns green.
2 To turn off the TV, press the POWER button
again. The screen image disappears and the
POWER/STANDBY indicator turns red.
Note
A small amount of electric power is consumed
even when the power is turned off.
1
AUDIO
VGA
INPUT VGA INPUT OUTPUT
3
2
4
9