Before You Start Sealing; Protective Tape; Cooling Fan - Weston PRO-2500 Manual De Instrucciones

BEFORE YOU START BAG SEALING
Before using the Chamber Vacuum Sealer, familiarize yourself with the
bag sealing functions. A vacuum bag is sealed when the Seal Bar Heating
Element is activated and heats the bag to its melting point, which then
permanently welds the bag layers together, sealing the bag shut.
Test seal a couple of bags to be sure that the Seal Time is set properly. The
Seal Time may need to be increased (+) or decreased (-) to optimally seal a
bag.

PROTECTIVE TAPE

strip of Seal Bar Tape on the above and beneath the
Seal Wire on the Aluminum Alloy Seal Bar.
DO NOT REMOVE THE TAPE!

COOLING FAN

The Vacuum Sealer has an Internal Cooling Fan that runs whenever the
unit is plugged in and turned on. To save energy, turn the unit "OFF"
and unplug the Power Cord when not in use.
There is a factory installed
SEAL BAR TAPE
DO NOT REMOVE!
FIGURE 1
3