Grounding Instructions; Extension Cords; Care & Cleaning Instructions - Weston PRO-2500 Manual De Instrucciones

GROUNDING INSTRUCTIONS

GROUNDING
This appliance must be grounded while in use
to protect the operator from electrical shock.
The appliance is equipped with a 3-conductor
cord and a 3-prong grounding type plug to fit
the proper grounding-type receptacle. The
appliance has a plug that looks like FIGURE
4. An adapter, FIGURE 5, should be used for
connecting plugs to two-prong receptacles.
The grounding tab which extends from the
adapter must be connected to a permanent
ground such as a properly grounded outlet box
as shown in FIGURE 6 using a metal screw.

EXTENSION CORDS

We prefer the unit be used only with its included
power cord. Use only 3-wire extension cords
which have 3-prong grounding-type plugs and
a 3-pole cord connector that accepts the plug
from the appliance. Use only extension cords
having an electrical rating not less than the
rating of the appliance. Do not use damaged
extension cords.
before using and replace if damaged. Do not
abuse extension cord and do not yank on any
cord to disconnect. Keep cord away from heat
and sharp edges.
WARNING!
Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED
FROM THE OUTLET/POWER SOURCE!
CARE & CLEANING INSTRUCTIONS
. NEVER IMMERSE the Chamber Vacuum Sealer in water or other liquid.
. Make sure the Chamber Vacuum Sealer has completely cooled before
cleaning it.
. Wipe clean all outside surfaces including the Vacuum Chamber and Vacuum
Lid with a damp cloth or paper towel. Most household spray cleaners are safe
to use. Avoid spraying directly into the vent on the sides of the unit. DO NOT
use abrasive cleansers!
. Be careful while cleaning not to peel or damage the strip of Seal Bar Tape
covering the Aluminum Alloy Seal Bar. Do not expose the Seal Bar Tape to
moisture.
. Dry all surfaces and close the Vacuum Lid before storing the Vacuum Sealer.
8
Examine extension cord
Before cleaning, assembling or disassembling the Chamber
Grounding
Prong
Circuit
Grounding
Conductor
Metal
Grounding
Screw
Cover of
Grounded
Outlet Box
Grounding
Means
AA2220
FIGURE 4
FIGURE 5
FIGURE 6