Charging The Robot - Amibot Spirit LASER Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
Operating the appliance

Charging the robot

Figure 1
There are two ways to charge the battery:
Using the home base (Figure 1).
Using the power adapter (Figure 2).
NOTES:
Before using the robot for the first time, you must charge it for at least 12
hours. The battery will only need to be charged for 240 or 300 minutes
thereafter.
The robot must be switched on while it is being charged.
Do not place a mirror or other highly reflective object within a distance of at
least 15 cm from the home base.
When the robot's battery is completely flat, the AUTO indicator light slowly
flashes red. While charging the LED flashes green. Once fully charged, the
AUTO light turns steady green.
If the battery is weak while the robot is cleaning, it returns to its home base.
The home base must therefore be switched on.
If the robot is not used for a long period of time, you are recommended to
fully charge the battery, switch off the robot and store it in a cool, dry place.
Figure 2
12

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido