Virtual Barrier - Amibot Spirit LASER Manual De Instrucciones

EN
Operating the appliance
FORBIDDEN AREAS mode
the robot must not go and then click Save.
HOME mode
If you need to charge the robot at any time while in use, you can do
so by pressing the "Charge" button.
The AUTO indicator light is steady green and the robot emits a
"Return to charging station" sound. The robot will automatically go
back to home base once it has completed its cleaning cycle (the time
it needs to search depends on the distance between the home base
and if there are any obstacles along its route).

Virtual barrier

You can identify forbidden areas manually. Use the virtual magnetic
barrier provided. Place it at the edge of the two areas you want to
separate. The robot stays within the virtual barrier while it is clean-
ing (no matter which cleaning mode is selected).
You can also determine forbidden
areas, where the robot must not go.
Before being able to determine the
forbidden areas, the robot must first
have completed its first cycle in AUTO
mode in order to have mapped the

room.
Select
appears on the mapping. Then
determine the area or areas where
20
"Forbidden area". A grid