Manual Of Use; Stove Operation; Controls And Physionomy - Hergom HERITAGE Libro De Instrucciones Para Instalación, Mantenimiento Y Uso

With your HERITAGE stove installed and connected to the
chimney, you are prepared to light the fire.
Before lighting your stove for the first time, you must
familiarise yourself with the different control systems and the
physionomy of your stove, how to choose the firewood, how to
light it and use it each day
Although the operation of your stove is easy, the solid fuel
combustion process is complex, as many factors are involved
and time and experience is needed to understand how it works.
ALWAYS REMEMBER the stove produces heat and it is
therefore necessary to keep children, clothes, furniture... away
from it as any contact might produce burns.
There follows some advice for you to suitably know your
stove and how it works, which we would ask you to read
carefully:

2.1.1 - CONTROLS AND PHYSIONOMY

Before lighting any fire, familiarise yourself with the
location and operation of the controls and parts of your stove and
learn how to use them (see Fig. 2 page 5)
For your own safety, do not modify these parts in any
case.
FRONT DOOR CONTROL: The front door enables you
to enter the stove to load firewood and for cleaning, and gives
you a view of the fire through the glass. To open the door, lift the
handle to 10 o clock (position on a clock) and draught on the
door. Fig. 15. To close the door, press the door against the
frame, lowering the handle to 8 o clock.
SIDE DOOR CONTROL: The side door enables you to
load firewood. To open the door, lift the handle to 2 o clock
(position on a clock) and draught on the door. Fig. 16. To close
the door, press the door against the frame, lowering the handle to
4 o clock.
ASH TRAY DOOR CONTROL: Open this door when you
need to remove the ash from the stove. To open the door, turn
the handle to 3 o clock (position on a clock). (Fig. 17) To close
the door, press the door against the frame, lowering the handle to
6 o clock.
PRIMARY AIR CONTROL: The primary air control
enables the amount of air coming into the stove to be increased.
By moving the control to the left, the entry of primary air is
increased (see Fig. 18)

MANUAL OF USE

2.1 - STOVE OPERATION

43
Open
Close
Fig.15
Open
Closed
Fig.16
Open
Close
Fig.17
+
-
Fig.18