Dash Disassembly - Metra 108-CH1B Instrucciones De Instalación

1. Unclip and remove the power window
switches, then remove (1) 9/32" screw
from underneath. (Figure A)
2. Unclip and remove the panel below the
steering column.
3. Remove (2) 9/32" screws from the
bottom edge of the radio/instrument
cluster trim panel on either side of the
steering column. (Figure B, C)
2

DASH DISASSEMBLY

(Figure A)
(Figure B)
4. Remove the pad inside the pocket on
the top center of the dash, then remove
(1) 9/32" screw from underneath.
Remove the dash panel surrounding the
radio and instrument cluster. (Figure D)
5. Remove (4) 9/32" screws securing the
radio. Slide the radio out, then unplug
and remove the radio.
Continue to Kit Preparation
(Figure C)
(Figure D)
|
1.800.221.0932 MetraOnline.com