Install And Format An Optional Memory Card - HP Photosmart E330 Serie Guía Rápida

Ocultar thumbs Ver también para Photosmart E330 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

and will ensure that images are accurately marked if you
use the date and time imprint feature.
1. Use
to adjust the
highlighted value.
2. Use
to move to the other
selections and repeat Step 1
until the date and time are set
correctly.
3. Press
when the date,
time, and format settings are correct, then press
again to confirm.
Install and format an optional
memory card
This camera supports standard, high speed, and high
capacity Secure Digital (SD and SDHC) memory cards,
32MB to 8GB.
1. Turn off the camera and open the
Battery/Memory Card door.
2. Insert the optional memory card in
the smaller slot as shown. Make
sure the memory card snaps into
place.
3. Close the Battery/Memory Card
door and turn on the camera.
NOTE:
When you turn on your camera with a
memory card installed, the camera indicates the
number of images you can store on the memory card
at the current Image Quality setting. This camera
supports storing a maximum of 2000 images on a
memory card.
10
HP Photosmart E330 series Digital Camera

Publicidad

Tabla de contenido
loading

Tabla de contenido