Braun 5 Serie Manual De Instrucciones página 7

Cleaning
Never use water to clean the shaver.
For easy cleaning after each shave, switch the shaver off.
Press the release buttons to lift the shaver foil (do not
remove the foil completely). Switch on the shaver for
approx. 5–10 seconds so that the shaved stubbles can
fall out.
Then remove the shaver foil and tap it out on a flat surface.
Using the brush, clean the inner area of the pivoting head.
However, do not clean the shaver foil nor the cutter block
with the brush as this may damage them.
Put a drop of light machine oil onto the long hair trimmer
and the shaver foil.
Replacing the shaving parts
To maintain 100% shaving performance, replace your foil
and cutter block at least every 18 month or when worn.
51S
Change both parts at the same time for a closer shave
with less skin irritation.
(Shaver foil (2) and cutter block (3): 51S)
Subject to change without notice.
For electric specifications, see printing on the special
cord set.
7