Sauder 414707 Manual Del Usaurio página 18

14 14
2
3
GOLD 5/16" FLAT HEAD SCREW
(8 used for the SLIDES)
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D24 and D25).
Fasten the DRAWER RIGHT (35GC) and DRAWER LEFT (35GD) to the DRAWER SIDES (D24 and D25). Use four GOLD 5/16"
FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Repeat this step for the other drawer.
Page 18
Roller end
10A
1
D25
3S
www.sauder.com/services
Screw head - turn CAM to line up holes in
SLIDES with holes in DRAWER SIDES.
10A
D24
2
3
(4 used in this step )
Roller end
1
414707