Hardware Identifi Cation - Sauder 414707 Manual Del Usaurio

35GA CABINET RIGHT - 2
SLIDE CAM - 4
10A
METAL BRACKET - 2
4G
12P CAM COVER - 6
1S BLACK 9/16" LARGE HEAD SCREW - 28
GOLD 5/16" FLAT HEAD SCREW - 16
3S
SILVER 5/8" FLAT HEAD SCREW - 4
23S
GOLD 1" MACHINE SCREW - 2
50S
Screws are shown actual size. You may receive extra hardware with your unit.
Page 4
HARDWARE IDENTIFICATION
CABINET LEFT - 2
35GB
FOOT BASE - 1
24E
CORNER
31G
BRACKET - 4
1R METAL PIN - 6
www.sauder.com/services
DRAWER RIGHT - 2
35GC
FOOT - 1 HIDDEN CAM - 14
25E 1F
KNOB - 2
48K 1L
(Refer to the step 17 for proper location and application)
2R RUBBER SLEEVE - 2
2S
22S
30S
DRAWER LEFT - 2
35GD
2F
WARNING LABEL - 1
1N
WARNING
Never use this furniture with a TV that is
too large or too heavy. Severe injury or
death can occur. The TV and furniture
will be unstable and may tip.
-The TV must less than 50 lbs.
-The base of the TV must be able to sit
completely on this shelf.
Refer to instruction book for complete
safety information.
Note: This is a permanent label. Do not
try to remove. Surface will be damaged.
08/05 2 6 9 2 2 0 269220
6R SHELF SNAP - 2
BLACK 1-7/8" FLAT HEAD SCREW - 10
SILVER 7/8" PAN HEAD SCREW - 4
BLACK 1-9/16" FLAT HEAD SCREW - 8
CAM DOWEL - 14
NAIL - 32
414707