Care And Cleaning - Kalorik SIS 40516 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Fax +1 305 430 9692
Leave the iron on the iron rest. The non-slip iron rest is specially
designed for this and will not damage the soleplate.
Wait for the appliance to cool before storing it away.
ANTI-LIMESCALE FEATURE
There is a replaceable decalcification cartridge inside the unit's
water tank that absorbs unsolvable calcium ions. It also emits
solvable sodium ions that soften water, which greatly slows the
process of mineral deposits.
Your appliance features an anti-scale cartridge that is located in
the water tank.
You must replace the cartridge every six months or after every
120 hours of ironing, whichever comes first. This period can vary
according to the iron's frequency of use and in your local area's
water scale rate. If the water is hard, you will have to change the
cartridge more frequently.
You can delay the replacement of the cartridge by using distilled
water or a mixture of 50% tap water and 50% distilled water.
To take it out, open the water tank and lift the cartridge out of
the water tank. When you put a new anti-scale cartridge in the
water tank, immerse it in water for some time before using the
appliance to obtain a better performance.
To obtain a new cartridge, contact Kalorik's after-sales service.
NEVER USE THE APPLIANCE WITHOUT ITS CARTRIDGE.

CARE AND CLEANING

Clean the iron regularly according to water hardness and
frequency of use.
Unplug the appliance and allow it to cool down.
To clean the plastic parts of the iron, use a damp cloth.
To clean the soleplate, use a damp cloth or a product made
specifically for this purpose. Never use abrasive products.
Never immerse the appliance in water or any other liquid.
Any other servicing should be performed by an authorized service
representative.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
Print only what is inside the frame.
10
Assembly page 10/40
SIS 40716 - 120501

Publicidad

Tabla de contenido
loading

Tabla de contenido