Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FIFTH STEP
•Use
diV 01
diV 01, diV 02, diV 05, diV10, diV 20, diV 50
the steps to follow must be completed, if they are not done the indicator will continue with the
previous configuration.
LF 2
•Press the key
scale will automatically restart.
•Press the key
262144
figuration and go back to the menu LF2).
100001
Use the keys
OF WEIGHT . (press the key
000000kg
•Use the keys
MUM WEIGHT. press the key
d 0.0kg
•Use the keys
exit from the configuration and go back to the menu LF2).
• Use
div 01
and go back to the menu LF2).
LF2
• Use
from the menu and the scale will begin again automatically).
LINEAL CALIBRATION
Up to six steps of calibration W0 ~W6
Make sure that the plate of the scale is empty before starting the calibration.
Press the key
or the first point of calibration.
The previous points of calibration will be removed and the message CLEAR is going to appear on the screen.
Press the key
to proceed with the next point of calibration.
Press the key
to go back to the previous point of calibration.
Press the key
to save everything.
Press the key
to finish the calibration and go back to the menu
to select the DIVISION:
After introducing the parameters LF2, the indicator will show the last configuration saved. All
Proceed with the calibration of weight after LF2.
to start and display the internal value. Press
To continue with the configuration. (press the key
,
and
,
and
,
and then
and then
tho change the step.(Press the key
,
and
To continue with the other configuration or press the key
LF 3
0 ~ 9
,
and then press the key
to exit from the configuration and go back to the menu LF2).
0 ~ 9
,
and then press the key
to exit from the configuration and go back to the menu LF2).
To move the decimal point ( press the key
LF3.
USER'S MANUAL ABD
to exit the menu and the
to exit from the con-
to choose the UNITS
to choose the MAXI-
To
to exit from the configuration
to exit
EN
37
Publicidad
Tabla de contenido
