Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FIFTH STEP
diV 01
LF 2
262144
100001
000000kg
d 0.0kg
div 01
LF2
LINEAL CALIBRATION
Up to six steps of calibration W0 ~W6
Make sure that the plate of the scale is empty before starting the calibration.
Press the key
The previous points of calibration will be removed and the message CLEAR is going to appear on the screen.
Press the key
Press the key
Press the key
Press the key
38
•Use
to select the DIVISION:
diV 01, diV 02, diV 05, diV10, diV 20, diV 50
After introducing the parameters LF2, the indicator will show the last configuration saved. All
the steps to follow must be completed, if they are not done the indicator will continue with the
previous configuration.
Proceed with the calibration of weight after LF2.
•Press the key
to start and display the internal value. Press
scale will automatically restart.
•Press the key
To continue with the configuration. (press the key
guration and go back to the menu LF2).
Use the keys
,
and
WEIGHT . (press the key
•Use the keys
,
MUM WEIGHT. press the key
•Use the keys
,
from the configuration and go back to the menu LF2).
• Use
and then
and go back to the menu LF2).
• Use
,
and
from the menu and the scale will begin again automatically).
LF 3
or the first point of calibration.
to proceed with the next point of calibration.
to go back to the previous point of calibration.
to save everything.
to finish the calibration and go back to the menu
0 ~ 9
,
and then press the key
to exit from the configuration and go back to the menu LF2).
0 ~ 9
and
,
and then press the key
to exit from the configuration and go back to the menu LF2).
and then
To move the decimal point ( press the key
tho change the step.(Press the key
To continue with the other configuration or press the key
LF3.
USER'S MANUAL ABD
to exit the menu and the
to exit from the confi-
to choose the UNITS OF
to choose the MAXI-
To exit
to exit from the configuration
to exit
EN
Publicidad
Tabla de contenido
