Boutside Back Exhaust; Outside Back Exhaust; Attach Mounting Plate To Wall - Monogram ZSA1201 Instrucciones De Instalación

Ocultar thumbs Ver también para ZSA1201:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OUTSIDE BACK EXHAUST

B
INSTALLATION OVERVIEW
B1. Prepare Rear Wall
B2. Attach Mounting Plate to Wall
B3. Prepare Top Cabinet
B4. Adjust Blower
B5. Mount the Oven
PREPARING THE REAR WALL
B1
FOR OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for
outside exhaust.
• Read the instructions on the REAR WALL
TEMPLATE.
• Tape it to the rear wall, lining up with the holes
previously drilled for holes A and B in the wall plate.
• Cut the opening, following the instructions of the
REAR WALL TEMPLATE.
49-40650-3
Installation Instructions
(Horizontal Duct)
ATTACH THE MOUNTING
B2
PLATE TO THE WALL
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to
a wall stud.
1
Remove the toggle wings from the bolts.
2
Insert the bolts into the mounting plate through
the holes designated to go into drywall and
reattach the toggle wings to
3 4
15

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Zsa1202Csa1201

Tabla de contenido