QSC DAB-801 Manual De Instalación Del Hardware página 12

Primary 4-Channel Amplifier Connections
EN
Primary 4-Channel Amplifier DataPort Connections
To attach a 4-channel amplifier to the DAB-801, connect male to male QSC DataPort cables from the HD-15 connectors labeled "Primary Amplifier
DataPorts" on the DAB-801 to the HD-15 DataPort connectors on the amplifiers.
Primary 4-Channel Amplifier Output Connections
Wire the outputs of the primary amplifiers to the green detachable terminal blocks labeled "Connect to Primary Amplifier" on the DAB-801. The
outputs of primary amplifier "A" should connect to the section of detachable terminal block that is labeled "A."
Make sure that each amplifier output is connected to the correct section of its terminal block.
12