Choosing A Location; General - ADE WS 1600 Instrucciones De Operación

Ocultar thumbs Ver también para WS 1600:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 78

Choosing a location

NOTE on material damage
‚ Protect the base station and wireless sensor
from dust, impacts, extreme temperatures
and direct sunlight.
‚ Protect the base station from moisture.
Position the base station exclusively in a dry,
closed room. The wireless sensor is protected
against moisture, but must be protected
from direct exposure to moisture, e.g. rain.

General

The base station and outdoor sensor exchange data over a
radio frequency. Location is therefore a determining factor
for the range of the wireless connection.
Pay attention to the following:
‚ The maximum distance etween the base station
and the outdoor sensor is 60 metres. This range is,
however, only possible with "direct line of sight".
‚ Protective construction materials such as reinforced
concrete reduce or inhibit signal reception between
the base station and outdoor sensor.
‚ Devices such as TVs, cordless phones, computers, and
fluorescent tubes can likewise disrupt signal reception.
‚ Do not place the base station and the outdoor sensor
directly on the ground. This limits the range.
‚ At low temperatures in winter, the performance of the
outdoor sensor batteries can markedly decrease. This
reduces the transmission range.
Weather Station with Wireless Outdoor Sensor WS 1600
59

Publicidad

Tabla de contenido
loading

Tabla de contenido