Ezviz C4S Serie Guia De Inicio Rapido página 11

2
Posting the Mounting Template
Tear off the mounting template and post it on a proper position.
3
Installing the Mounting Base
Drill screw holes according to the "
then push the expansion screw into the holes.
Align the mounting base to the mounting template and secure it with
screws.
If you install the device on the wooden wall, the screws can be directly
pushed in and fixed.
1
Cement Wall
If you want to route cables from the top, drill the installation hole A
in the middle of the template.
" on the mounting template, and
2 Wooden Wall
6