Overload Protection - Makita DGA411 Manual De Instrucciones

Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
► Fig.2:
1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to
indicate the remaining battery capacity. The indicator
lamps NOTE: Depending on the conditions of use and
the ambient temperature, the indication may differ
slightly from the actual capacity.
Indicating the remaining battery
capacity
Country specific
When you turn the tool on, the battery indicator shows
the remaining battery capacity. ► Fig.3:
indicator
The remaining battery capacity is shown as the following
table.
1. Battery
Tool / battery protection system
The tool is equipped with a tool/battery protection
system. This system automatically cuts off power to the
motor to extend tool and battery life. The tool will
automatically stop during operation if the tool or battery
is placed under one of the following conditions:

Overload protection

20 ENGLISH
Battery indicator status
On Off
Remaining
battery
capacity
Blinking
50 % to 100%
20 % to 50%
0 % to 20%
Charge the
battery