MEANING OF SYMBOLS
The instrument label shows a number of symbols, as prescribed by the UNI EN 980 standard.
Their respective meaning is specified below.
SYMBOL
"SERIAL NUMBER"
SN
This symbol must be accompanied by the manufacturer's serial number. The serial
number must be adjacent to the symbol.
"DATE OF MANUFACTURE"
This symbol must be accompanied by the year. The year must be written
as a four- figure number.
"ATTENTION, SEE OPERATING INSTRUCTIONS"
!
Moreover, in the present manual, various symbols can be seen at the side of descriptions,
notes, etc.The purpose of these illustrations is to draw the reader's attention to a particular
note or explanation. The meaning is specified below.
SYMBOL
PARTICULARLY IMPORTANT INFORMATION FOR REASONS OF
SAFETY
WARNING
This symbol is intended to draw the reader's attention to specific funda-
mental principles for the operator's safety.
GUARANTEE INFORMATION
Euronda guarantees the quality of its equipment, if used in accordance with the instructions supplied in
this manual, and according to the conditions printed on the GUARANTEE CERTIFICATE.
WARNING: the CUSTOMER USER must fill in all parts of the DETACHABLE SLIP of the guarantee certifi-
cate and send it to EURONDA S.p.A.
The guarantee is effective from the delivery date of the unit to the customer, which is confirmed by the
return of the guarantee slip correctly filled in and signed. In the case of dispute, the date indicated on
the purchase invoice, which shows the serial number of the unit, will be considered valid.
NOTE: Please retain the original packaging and use it each time the unit needs to be transported. The
use of different packaging could damage the product during transportation.
The unit will not be replaced nor will the warranty be extended in the event of misuse.
Repairs under warranty will be effected according to the unquestionable decision of
Euronda S.p.A. and will not include packaging, transport or labour costs.
4
DESCRIPTION
DESCRIPTION
COMPACT