Euronda COMPACT 15 Manual De Instrucciones página 29

COMPACT
Before using your COMPACT negatoscope, carefully read these safety warn-
ings. Failure to observe them can cause accidents or damage the apparatus.
KEEP THE AREA AROUND THE NEGATOSCOPE CLEAN AND DRY.
NEVER DISASSEMBLE THE COMPACT
WARNING
THE HIGH INTERNAL VOLTAGE IS DANGEROUS
If it is not possible to disconnect the electricity or if it is too far or not visible to
the person who is making the repairs, attach the sign "Work in Process" on
the switch after having turned it "OFF".
CLEAN THE NEGATOSCOPE WITH A DAMP CLOTH, AFTER ENSUR-
ING THAT THE CONNECTION CABLE HAS BEEN UNPLUGGED
(before reusing the machine make sure that the machine
WARNING
is completely dry).
DO NOT USE SOLVENTS IN THE LABEL.
MAKE SURE THAT THE WIRING HAS A GROUND CABLE WHICH
CONFORMS TO ALL OF THE SAFETY NORMS OF THE COUNTRY OF
INSTALLATION.
NEVER REMOVE THE LABEL ON THE MACHINE
ENSURE THAT THE MACHINE IS CONNECTED TO THE CORRECT
ELECTRICAL VOLTAGE
USE EXCLUSIVELY THE ORIGINAL REFILLS
If the negatoscope doesn't WORK properly refer to the selection in the manual "Solution to
Problems" for the possible cause. If you need subsequent information or the machine have to be
repaired contact the specialised personnel of the supplier or the technical office of Euronda S.p.A.
S S A A F F E E T T Y Y
® NEGATOSCOPE.
7