UFESA BS4790 Instrucciones De Uso página 6

Ocultar thumbs Ver también para BS4790:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
ENGLISH
1. Stopper
2. Cover
3. Jug
4. Seal
5. Blade cone
6. Motor housing
7 Motor body retaining collar
8. Motor clutch.
9. Controls
a) Speed 1 [
]
b) Speed 2 [ ]
c) Speed 3 [
]
d) Speed 4 [
]
e) Speed 5 [
]
f) Speed 6 [
]
g) Fixed speed to impulse speed converter [ ]
h) Ice crushing function [
i) Stop button [
]
10. Non-slip feet
11. Cable tidy
IMPORTANT NOTES
• Read these instructions carefully before using the appliance for the
first time. Safeguard them for future reference.
• Only connect it to the voltages stated on the characteristics plate.
• This appliance is suitable for use with foodstuffs.
• This appliance has been designed exclusively for domestic use.
• Always use the blender on a flat, level work surface.
• This appliance must not be used by persons (including children)
with physical, sensory or mental impairments unless they have been
instructed in its correct use by a responsible adult.
• Do not handle the appliance with wet hands.
• Avoid contact with the moving parts
• The edge of the blade is very sharp. To avoid injuries handle the
blades with extreme care when cleaning them.
• Never insert metal utensils, such as knives or forks, into the inside
of the jug while the appliance is operating.
• The use of accessories not supplied by the manufacturer may
cause accidents.
• Do not operate the appliance without a workload.
• Do not leave the appliance close to heat sources nor allow the
cable to come into contact with hot surfaces.
• Do not operate the appliance with the cable still coiled.
• Never try to fit or remove the jug on the blander while the appliance
is still running.
• Unplug the appliance before attempting to change any accessory
or accessing any part of the liquidiser that might move during
operation.
• Do not open the lid on the blender until the motor has stopped.
• Do not leave the appliance operating unattended, especially with
children about.
• Unplug the appliance from the mains when it is not in use
• Do not unplug it by pulling on the cable, nor leave the plug hanging
freely..
• Make sure that the appliance is unplugged before cleaning it.
• DO NOT IMMERSE THE MOTOR HOUSING INTO WATER OR ANY
OTHER LIQUID.
• Do not use the blender if the blade is damaged.
BS4790.indd 6
BS4790.indd 6
]
• Do not switch the appliance on if the cable or the plug are
damaged or if it can be detected that the appliance is not working
correctly
• Never use the appliance outdoors
• ATTENTION: To reduce the risk of fire or electric shock, never
remove any of the covers. There are no user serviceable parts on
the inside. Cable repairs and replacements must be carried out
exclusively by an Authorised Technical Service Centre.
ASSEMBLY
Before using it for the first time, use soapy water to wash all the
pieces that are going to come into contact with foodstuffs.
The edge of the blade is very sharp.
To avoid injuries handle the blades with extreme care when cleaning
them.
Fit the seal (4) over the blade cone (5).
Make sure the seal is fitted correctly, with the lip facing upward
(Figure 1).
Seat the blade cone on the motor body retaining collar (7)
(Figure 2).
Slot the jar (3) into the motor body retaining collar (7) (Figure 3) and
twist the jar anticlockwise so that it locks on. (Figure 4)
Place the jug assembly onto motor body (6). The icons indicate the
locked position as well as the correct direction to turn it. (Figures
5 & 6)
Dismantle
Attach
To fit the lid onto the blender (2), insert it into the top of the jug and
press down on it so that it locks into position. (Figure 7)
To fit the stopper, line up the clips on the stopper with the holes in
the lid opening (figure 8) insert and turn it clockwise until it locks.
(Figure 9)
Important: This blender is fitted with a safety device that stops the
motor from starting if the jug is not correctly positioned.
PREPARING FRUITS OR VEGETABLES
Wash or peel the fruits or vegetables that you want to liquidise.
To process fruits with seeds (such as apples or pears), remove the
skin and the core.
Fruits or vegetables with skin (e.g. citrus fruit, melons, kiwi fruit, etc)
must be peeled beforehand.
Grapes must be removed from the stems before being liquidised.
Cut the fruit or vegetables into pieces that can be pushed through
the filling spout.
Do not use fibrous fruits or vegetables (e.g. raisins) with this
blender.
Fruits and vegetables used should be as fresh as possible.
Fruits and vegetables contain vitamins and minerals that lose their
properties when they come into contact with oxygen or light. Drink
the juice just after making it.
If you want to store it for a few hours, put it in glass or ceramic
containers in the refrigerator. Add lemon juice to help preserve it.
USE
Always place the blender on a flat, stable surface.
The blender will only work if the jug has been correctly fitted.
Plug the appliance into the mains supply, the luminous "Stop"
indicator will flash to indicate standby mode.
Place all of the ingredients into the container without exceeding the
1.2 litre maximum mark on the jug. For best results, pour in any liquids
first and switch the appliance on, adding the solid ingredients as you
liquidise.
17/4/07 09:42:38
17/4/07 09:42:38

Publicidad

Tabla de contenido
loading

Tabla de contenido