Switching The Appliance On; Operating Tips - Siemens GS N Serie Instrucciones De Uso

Controls
Fig. 2
1
Temperature display
Indicates the set temperature of
the freezer compartment.
2
Alarm display
Lights up if the freezer
compartment becomes too warm.
It goes out when the freezer
compartment has reached the set
temperature.
3
Display super freezing
Illuminates when super freezing is
on.
4
Temperature selection button
The required temperature is set
with this button.
5
"super" button
Serves to switch the "super"
freezing function on and off (see
chapter entitled "Super freezing").
6
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".
7
On/Off button
Serves to switch the whole
appliance on and off.
Switching
the appliance on
Switch on the appliance with the On/Off
button 7.
A warning signal sounds. "AL" flashes on
the temperature display 1, the super
freezing display 3 flashes and the alarm
display 2 is lit.
Press the alarm button 6. The warning
signal switches off and the super
freezing display 3 goes out.
When the appliance has reached the set
temperature, the temperature display 1
indicates the set temperature.
Alarm display 2 goes out.
When the door is open, the light is lit.

Operating tips

When the appliance has been
■
switched on, it may take several hours
until the set temperature has been
reached.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly.
This prevents condensation in
the area of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
en
27