Wash Cycles - LG ADFD544 Serie Manual Del Propietário

us_main.book.book Page 26 Tuesday, September 1, 2020 5:54 PM
26 OPERATION
Chime On/Off Button
c
• To activate or deactivate the button sounds, press and hold Extra Dry and Delay Start
simultaneously for three seconds. The error alert sound cannot be turned off.
Cancel Button
d
• The drain pump activates and the cycle cancels. Once the dishwasher finishes draining, the power
turns off.
• Press and hold Start for three seconds to activate.
Start Button
e
• To operate the machine, either press Start and close the door within four seconds or close the door
and press Start.
• If Start button is not pressed to start the cycle, an alert will sound.

Wash Cycles

Select your desired cycle.
Auto
This cycle senses the soil amount and soil
toughness and is optimized to achieve the best
cleaning.
Heavy
This cycle is for heavily soiled dishes and dishes
with hardened on soil. This cycle defaults to the
strongest spray intensity and uses it to wash
heavily soiled dishes.
Delicate
Use this cycle to clean delicate items such as fine
china and stemware.
Normal
This cycle is for moderately soiled, everyday loads.
Turbo
This cycle will clean heavily soiled dishes in an hour
using slightly more energy and water.
• This cycle does not have drying. Select the Extra
Dry option for better drying.
Download Cycle
Use a dedicated cycle downloadable via Wi-Fi or
NFC.
NOTE
• Only the cycle code for the current Download
cycle appears on the appliance. See the
smartphone app for cycle codes, names, and
more information about the available cycles.
- Default Cycle : P1. Pots & Pans
Machine Clean
This cycle is for cleaning the inside of the
dishwasher. Use the cycle without dishes in the
machine. It eliminates residual soils, odor, white
spots, and other dirt. Add citric acid or another
cleaning agent for more effective results.
• Press and hold Heavy for three seconds to
activate.
NOTE
• The Machine Clean icon flashes every 30
a
cycles. To activate or deactivate the icon, press
the Delicate button for three seconds.
• If the High Temp. option is added to a cycle, the
Machine Clean icon stays lit at the end of the
a
cycle if the dishes were properly sanitized.
Rinse
This cycle is a quick rinse for dishes that will not be
washed immediately. The cycle rinses dishes that
have excess soil to soften dried on residue. Rinsing
the dishes helps prevent odors in the dishwasher.
No detergent should be used.
• This cycle does not have drying.
• Press and hold Normal for three seconds to
activate.