Viewing The Device Settings; Downloading The Device Settings; Preliminary Operations - DSC GS3100 Manual Del Usario

Viewing the Device Settings

To view the Communicator settings on the screen, use the Upload from board icon.

Downloading the Device Settings

Once programming has been completed (or an uploaded file containing existing data has been modified), download the data
into the Communicator, using the Download to board icon.

Preliminary operations

When the application starts, you will be presented with the Main window: if you use the mouse to click the menu option Untitled
#1 in the top left-hand part, two sections appear.
z The following sections may be found within the general parameters section:
Panel settings: in this section, it is possible to recall and update the configuration of a customer using the following
procedure:
1. Left-click on the application.
2. Enter or update the information relating to the customer and the system. Click to confirm.
Upload from board: if this icon is selected, the data programmed on the board is loaded onto the PC.
Download to board: if this icon is selected, the programmed data is sent to the board.
Factory defaults: if this icon is selected, the initial default settings are restored.
Board reset: if this icon is selected, the Communicator is reset.
z The following sections may be found within the GS3100 section:
Phonebook: telephone contact list page.
Options: options page.
GPRS: GPRS parameters page.
Status: page used to check the status of the Communicator.
To start the configuration of a new Customer, click on File->New Customer.
To display the list of customers stored in the archive, select the menu command File->Open. This section will allow you
to delete or retrieve configuration data, as follows:
1. Using the right button on the mouse, click on the Customer's name.
2. Click Load
configuration.
You can load the configuration data by double clicking the respective name field.
You can list Customers in alphabetical or code order by clicking the heading of the column concerned.
The configuration data are grouped in the following pages. The (Status) page is for "Supervisory and Control" purposes. All
the pages are described in detail in this section.
12
upload the respective data from the Hard-Disk, or Delete selected customer to delete the data
GSM/GPRS Alarm Communicator