GYS 4T Manual Del Usuario página 16

Translation of the original instructions
A. Push & Stretch
Cap Head
Ram
Male Connector
Flat Base
B. Spread
Ram
Flange Base
Extension
Flat Base
(i) Vertical Push
OPERATION
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under
subheadings therein before use of this product.
TO OPERATE PUMP (A)
1. Check the Hydraulic Fluid Level, following the instructions in the Cleaning and Maintenance section.
2. Determine which direction the frame needs to be bent.
3. Remove any obstructions that cou Id be damaged or are in the way.
16
HYDRAULIC CYLINDER KIT
(i) Vertical Push
(iii) Horizontal Stretch with Extension
Note: If using the Flange Base and Flange Head,
thread the FI ange Base onto the Ram completely
and align the Flange Head to it.
Ram
(ii) Horizontal Push
Male Connector
Flat Base
(ii) Horizontal Push
Flange Head
Flange Base
(iii) Horizontal Stretch with Extension
EN
Cap Head
Ram