GETTING STARTED
AUDIO / VIDEO CONNECTIONS
NOTE: Audio/Video cables
are not supplied
HDMI (DVI) INPUT1 can be used to
hookup a DVI device with the use of an
appropriate DVI to HDMI cable or adapter.
(AUDIO DVI jack needs to be hooked up to
the DVI device as well.)
NOTE: HDMI INPUT1 may also be used to
hookup any digital device with an
HDMI output, without the use of
the AUDIO (DVI) jack.
DVI
DVD PLAYER
(or similar device)
DVD PLAYER
(or similar device)
Component connections will accept SDTV,
EDTV and HDTV video signals. Use them
for great image quality from digital
devices.
NOTE: Always match the color of your
device's output jack, the connector
and the HDTV's input jack.
WARNING
Wireless USB adapter is not a toy. Do not
separate adapter from extension case.
Small parts can be a choking hazard to
children if swallowed.
USB input jack is used to connect a USB mass
storage device (not included) to display digital images on
your HDTV, or hookup a USB Wireless dongle (included)
to connect your HDTV to your local area network (LAN).
HDMI INPUT1, 2 & 3 are used to hookup HD digital
devices such as a Blu-ray player, HD Cable Box, HD
Satellite Receiver or Video-game System.
Connect your digital device's HDMI output to any of
the three (3) HDMI inputs on your HDTV with the use
of an HDMI cable.
Composite connections are used to hookup analog
equipment such as a VCR or an older DVD player.
NOTE: Always match the color of your device's
output jack, the connector, and the HDTV's
input jack.
Audio Output L/R jacks are used to
hookup an external stereo Amplifier.
(Do not connect external speakers
directly to the HDTV.)
Need help?
www.sanyoctv.com
NOTE: An active internet con-
USB FLASH
nection and wireless modem
DRIVE OR
is needed to connect your
DONGLE
HDTV using the USB dongle.
(or analog device)
Digital Audio Output is used to
hookup a multichannel receiver
with the use of a phono-type digital
audio cable.
MULTICHANNEL
RECEIVER
STEREO
AMPLIFIER
1-800-877-5032
SATELLITE RECEIVER
(or similar device)
VCR
7