Honeywell Home HumidiPRO H6062 Instrucciones De Instalación página 18

Wiring the sensor
Caution
Electrical Interference (Noise) Hazard. Can cause erratic system operation.
• Keep wiring at least one foot away from large inductive loads such as motors, line
starters, lighting ballasts and large power distribution panels.
Use shielded cable to reduce interference when rerouting is not possible.
• Be sure wires have a cable separate from the thermostat cable.
• Do not route temperature sensor wiring with building power wiring, next to control
contactors or near light dimming circuits, electric motors or welding equipment.
• Avoid poor wiring connections.
• Avoid intermittent or missing building earth ground.
18