Honeywell True STEAM HM506 Guia De Instalacion página 19

8. Replace inline filter at least once per season. Turn water supply off before replacing.
Press down filter
collar ring and
pull out 1/4 in.
water line from
each side.
9. Once clean, reattach tank by securing the latch. Engage the white
water valve to the tank's black spool, and "Lock" the shut-off valve.
The "Press Reset" light will blink at start-up. Push the RESET button
to ready the humidifier.
10.
• Clear any dust from the ventilation holes in the humidifier's cover.
• Clear any debris from the water drain tube.
• Make sure the water tank gasket seal is seated properly in the
humidifier base, and is in good condition (no cracks or tears) before
reattaching the humidifier water tank.
• Check that the humidifier is still mounted level.
automatic end of season shutdown
TrueSTEAM has the intelligence to empty the tank when humidity is not needed for an extended
period. After 48 hours of inactivity, TrueSTEAM will drain and remain empty until humidity is
needed again. This prevents water from stagnating within the tank. The tank will refill with water
upon next humidity call.
extended Vacation
It is recommended you turn off the humidifier's water supply and turn off the humidity control for
extended leaves. When you return, turn on the humidifier water supply and reset the humidity
control to a comfortable position.
Insert 1/4 in. lines into
new filter. Apply modest
pull to ensure a tight fit.
M28697
17
TrueSTEAM Humidification System
maIntenance
M27411
69-2285EFS—03
M28698