Receiving; Led Indicator Status - Kenwood TK-D240 Guia Del Usuario

RECEIVING

Select the desired zone and channel. If signaling has been
programmed on the selected channel, you will hear a call only if
the received signal matches your transceiver settings.
Receiving Group Calls
When you receive a group call and the received group ID
matches the ID set up on your transceiver, you can hear the
caller's voice.
Receiving Individual Calls
When you receive an individual call, a ringing tone will sound. To
respond to the call, press and hold the PTT switch and speak
into the transceiver as you would during a normal transmission.

LED INDICATOR STATUS

Indicator Color
Lights red
Lights green
Lights blue
Blinks red
Blinks green
Blinks orange or
blue *
Blinks red/orange
* Your dealer can set the LED to blink either orange or blue for
Transceiver operation.
Transmitting
Receiving a call
The Transceiver Password function is
programmed.
Battery power is low while transmitting
Scanning
Receiving an encoded call (signaling, etc.)
The selected channel has not been
programmed and cannot be used.
Meaning
17