Rear Panel - Steren CCTV-972 Manual De Instrucciones

Rear panel

1 2 3 4 5 6 7 8 9 10
1. V1-V4 (video input connectors): BNC connectors for CCTV cameras.
2. VOUT (video output connector): video output BNC connector to a monitor or display.
3. A1 (audio input): useful for connected cameras using microphone with an RCA connector
4. AOUT (audio output): RCA Jack for audio output.
5. VGA: allows you to connect a VGA monitor.
6. NET: use an RJ-45 LAN cable to connect to a LAN.
7. USB connectors: connect devices such as USB flash drives to perform backups of the
recordings and firmware configurations. It also allows you to connect a mouse.
8. RS-485: it allows you to connect PT or PTZ cameras.
9. Power supply input.
10. On/off switch.
7 7