Network Connection - Steren CCTV-972 Manual De Instrucciones

NETWORK CONNECTION

The following instructions are only for reference. Look for how to open ports and
configure the modem with your Internet service provider (ISP).
Consult a technician in case of not knowing how to connect a DVR to the Internet.
2. To assign the IP address to the DVR, enter to MENU > SETUP > NETWORK > LAN and
choosse a modality to set the configurations.
- IP (static): To use this option you need to deselect the DHCP option, the IP address, Net
Mask and the gateway must be assigned manually. Remember, these parameters must be
within the modem range.
Consult your network administrator for more information.
1. Connect the DVR to a LAN port of the modem via a network
cable.
21 21