Steren CCTV-972 Manual De Instrucciones página 64

- DHCP: If you mark this option, the modem automatically assigns the address and ranges
in the IP address, Net Mask, Gateway and DNS fields.
3. It is recommended to leave the factory settings in the HTTP Port (which establishes
communication with the modem), Dev Port and Mobile port fields; however, you can assign
a special range.
These same ports must be open on the modem to monitor the DVR locally and remotely.
4. To monitor it locally (LAN), enter the IP address you assigned to the DVR in the Internet
Explorer window.
- To monitor remote (WAN) mode, enter the public IP.
Note: if you have selected in the HTTP port field a different range than 80, enter the
public IP address followed by a colon and the port number that you assigned, for example:
http://189.254.6.194:87/
Consult your Internet service provider for the public IP.
22 22