Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTIONS
-Connection of cameras
Connect the camera video output to the input connector V1-V4 in the back of the DVR. The
input interface is a BNC connector.
-Audio connections
• Input:
If you want to connect the audio cable from a camera with microphone, insert it into this A1
RCA connector.
• Output:
If you require an audio output, use the RCA AOUT connector and connect the DVR to the
external sound source.
- Monitor or display connection
Connect a display to output BNC (VOUT) or use a monitor VGA input.
-Power connection
Connect the power adapter to the power input located on the rear panel.
-Ethernet network connection
Connect a network cable to the RJ-45 connector for remote access via the Internet or
Ethernet.
-USB connection
Ports USB can connect units as a mouse and USB memories.
-Connection of PT or PTZ cameras
According to its polarity, insert the RS485 cables from the camera in the 485 +/- inputs.
9 9
Publicidad
Tabla de contenido
