Steren CCTV-972 Manual De Instrucciones página 76

• MTD.
- Buzzer. Activates or deactivates the alarm of DVR.
- Sensi.: Adjusts the camera sensitivity.
- Area: Determine the area in which the camera detects movement:
By default, the entire area of the camera is enabled to detect motion (red boxes). To block
any area, click that box becomes transparent. The yellow box indicates the center of the
recording area.
When you finish setting the detection area, right click with your mouse and press "Confirm"
to save your changes.
- Duration: activates or deactivates the alarm after movement is detected. The duration can
vary between 5 and 60 seconds.
- Copy to: this option allows you to select the channel you want to copy the settings.
34 34
Motion detection recording settings.
- Channel. Select the channel to which applies
the changes.
- Type. Choose the type of recording: motion
detection or video loss. You can also lock the
selected channel.
- Rec. CH. Select the channel that will perform
the desired recording type.