Giropes Baxtran TC15 Manual Del Usaurio página 31

ExAMPLE
weight display
200000
2
5
Note:If you have been wrong in some parameter, press
Press
LF 3
LINEAL CALIBRATION
Up to six steps of calibration W0 ~W6
Ensuring that the plate of the scales is empty before to start the calibration
dISPLAy
LF3
•press the Key
Note: the pieces display (screen with icon
W0
•Press the key
(Press the Key
W1
•place 1/3 of the maximum weight on the plate and press
W2
•place 2/3 of the maximum weight on the plate and press
On the wEIGhT DISPLAY( SCREEN WItH ICON
rical numbers,considering the number of decimal places to be used.
Example:
2.000,00kg to must write 200000
Press the , until that you scroll at the uNIT wEIGhT screen (SCREEN WItH ICON
enter the decimal number that you desired. In the previous example 2 decimals.
Press the , until that you scroll at the PIECES screen (SCREEN WItH ICON
division value. to select between 1 / 2 / 5
to confirm and save the paramters or
to start or the key
to calibrate the zero.
to exit from the calibration and go back to the menu Lf3)
to exit from the calibration and go back to the menu Lf3)
to exit from the calibration and go back to the menu Lf3)
) to introduce the value fS by means of the nume-
for scroll at the corresponding screen and correct the error.
to go back to menu without save.
dESCrIPTION
to exit the menu and the scale will start again automatically.
) shows the value of internal counts during all the process.
to calibrate 2/3 th the capacity. (press the key
to calibrate 2/3 th the capacity. (press the key
USER'S MANUAL TC15
) ,
) , enter the
eN
31