Giropes Baxtran TC15 Manual Del Usaurio página 32

W3
W4
LF3
LF 7
GRAVITY
*Introduce the gravity of your zone before doing the first calibration.
*Introduce the gravity of destination after doing the calibration.
*the value of the gravity will be denied if it is bigger than 9.83217 (gravity of the pole) or inferior to 9.78031 (gravity of the
equator).
Value of factory: 9.8010
dISPLAy
LF 7
9.8035
*ONCE REALIZED tHE CALIBRAtION tHE INDICAtOR USES fOR fAULt tHE gRAVItY Of USE.
32
•place the maximum weight on the plate and press the key
the key to exit from the calibration and go back to the menu Lf3)
•Press the key to complete the lineal calibration. (press the key
and go back to the menu LF3)
•Use the keys , and then the key
exit from the menu and the scale will begin again automatically.
• press the key to continue or the key
automatically.
• Use the number keyboard,
and go back to the menu Lf 7).
weight window
Indicates the calibration of gravity
PIECE wIEGhT wINdOw
Indicates the gravity of use.
to continue with other adjustments and press the key
dESCrIPTION ANd SEQuENCE OF uSE
to exit from the menu and the scale will start again
0 ~ 9
to enter the value of gravity. (press
USER'S MANUAL TC15
to calibrate the full capacity. (press
to exit from the calibration
to exit from the configuration
eN
to