General Safety Notes; Intended Use; Processable Material; Safety Equipment - Weidmuller Cutfix 8 Manual De Instrucciones

2

General safety notes

2.1 Intended use

The machine is intended for cutting circular conductors
to length. Only the material described below may be pro-
cessed using the machine.
The machine must only be used within the technical limits
described (see section 3.1). Modifications to and recon-
structions of the machine must not be performed.
Intended use also includes paying attention to the docu-
mentation.

2.2 Processable material

Flexible wires with a cross-section of:
– Flexible wire
– Solid wire

2.3 Safety equipment

The machine is equipped with the following safety devices:
– Protective cover
– Mains adapter
These items of safety equipment must not be rendered
ineffective. They must be checked once per year by a ser-
vice technician.

2.4 Personnel

Only trained personnel may operate the machine and per-
form maintenance activities. Training also includes having
fully read the operating instructions.
Repairs may only be performed following con-
sultation with Weidmüller Service and only by
an electrical specialist.
Keep the operating instructions stored so that
they can be inspected by operating personnel
at any time.
All documents can also be downloaded from
the Weidmüller website.
2571390000/01/11.2017
0.08–10.0 mm² (AWG 28-8)
0.08–2.50 mm² (AWG 28–14)
21