Charge; Upload Data - Gima SP-10 Manual De Usuario

26

6.1.6 Charge

There are two kinds of charging methods
1) Connect the device with computer by data line― then the device should be under charging state.
2) Connect the device with power supply by power adapter, then the device should be under charging state.
For device charging, connect it with the power where easy to be cut off, after charging completed, unplug
the power adapter to cut off from power.

6.1.7 Upload Data

Install the PC software in the computer, then the following figure will appear after completing.
Figure 28
1) Connect the device with computer by data line,double press the icon to open the PC software procedure.
2) Press the corresponding key to achieve upload data, delete case, print information, background, select lan-
guage, switch PDF format, set the testee information etc.
3) Press "Exit" to exit the software, unplug the data line from the computer to achieve uploading.