Using The Chronograph - Breitling GALACTIC Manual De Instrucciones

USING THE CHRONOGRAPH

I. M
EASURING A SINGLE SHORT TIME
Your chronograph is equipped with security pushpieces which ensure
enhanced water-resistance and provide effective protection against shocks.
Consequently, pushpieces should only be activated after unscrewing the
retaining ring.
Nota bene: it is important to keep the pushpieces
screwed in when the chrono graph is not in use.
1. Press pushpiece A to start the chronograph. Hand 3
shows the measurement in seconds.
2. Stop the measurement by pressing pushpiece A once
more. t he measurement is done in hours (totalizer
1), minutes (totalizer 2), seconds and 1/4 of a second
(hand 3).
3. r eturn the chronograph to zero by pressing push-
piece B.
18
II. M
EASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3
allows you to follow the measurement in seconds.
2. t o interrupt the measurement, press pushpiece A
once more. t o restart the time measurement, press
pushpiece A. t his procedure makes it possible to
add several short times.
3. t he chronograph is reset to zero by pressing push-
piece B, once the final measurement has been stopped.
19