Klarstein 10032097 Manual Del Usuario página 31

If the grinder shaft becomes blocked during the grinding process
Changing the activated carbon filter
1 Take the filter holder (15) from the water tank (13) and open the filter container flap
and remove the used activated carbon filter.
2 Remove the activated carbon filter (16) from its plastic packaging and thoroughly
rinse under running water in order to remove any potential production residues.
3 Place the new filter in the filter container and close the filter container flap.
Slide the filter holder (15) into the recess (arrow).
Push the locking button (on the symbol) with a
pointed object and remove the lid.
Clean the grinder shaft (14) with the cleaning brush
supplied.
EN
31