Belkin TuneBase F8Z049ea Manual De Instrucciones página 9

Storing and Using Presets
1. To store a preset, select the desired frequency using " " or " " buttons. Press and
hold the desired preset button (1, 2, 3, or 4) for two seconds. An audible beep sounds
when the new frequency is programmed*. The iPod display reflects the change
when the memory button is released by showing which memory button was pressed
followed by the frequency saved in that memory position.
* Do NOT remove the iPod from the cradle until it returns to the Main Menu screen or
new settings may not be saved.
2. To select a preset frequency, momentarily press "1", "2", "3", or "4". This instantly
tunes the FM transmitter to the frequency stored in that preset.
Frequency display
Frequency selector
Memory station display
Memory stations 1 - 4
Storing and Using Presets | 05
En