ABB Busch-Universal 6593U-500 Manual De Instrucciones página 99

Operation with UP Sensors
1.1.1.60
NOTES
-
Switching on and dimming are not possible via
theextension.
-
Repeated action when the lighting is switched on
leads to "retriggering" of the set time.
Active Extension Operation (Busch Watchdog®) via
Insert 6805 U and FM Sensors
Since the master and the extension each have a
separate setting for the dusk value, the actual
brightness conditions at the installation site can be
individually taken into account.
The effective overtravel time is calculated by adding the
times of the master and extension together. In the case
of FM Sensors 6800-xxx-102(M), it is recommendable
to operate the extensions with the time-setting short-
time impulse
adhered to as precisely as possible.
if the times set at the master should be