Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
14.
Mute.
15.
Return, Cancel or Exit.
16.
Skip Backwards also Subtitle when in shift mode.
17.
Skip Forwards also Aspect Ratio Control when in shift mode
18.
Rewind also Teletext Mix when in shift mode.
19.
Fast forward also Teletext 100 when in shift mode.
20.
Play also Teletext Off when in shift mode.
21.
Stop also Teletext On when in shift mode.
22.
Pause also Teletext Reduce when in shift mode.
II
23.
Record also Picture-in-Picture toggle when in shift mode.
24.
Favorites channel also ENTER when in shift mode.
25.
Red button when in SAT/CBL and TV modes also hard drive
menu for DVD-R when in shift mode.
26.
Green button when in SAT/CBL and TV modes also disc menu
for DVD when in shift mode.
27.
Yellow button when in SAT/CBL and TV modes also zoom when
in shift mode.
28.
Blue Button when in SAT/CBL and TV modes.
29.
4 way directional pad for navigating menu's.
30.
OK for selecting options in menu's.
-
0
9
31.
Numeric numbers 0 to 9.
12
GB
By entering Device Code
You may setup the Z-URC by following the code entering instructions.
1. Referring to the DEVICE CODE LIST, look up the 4-digit Device Code
which corresponds to the brand of your A/V equipment. If there is more
than one Device Code listed under your brand, start from the first code.
2. Press the desired Device Mode Key (e.g. TV).
3. Hold down "CH +" and "VOL -" on t
seconds until the green indicator lights up.
4. Use the number keys "0" - "9" to enter your 4-digit Device Code. The
.
indicator flashes twice then goes out.
Turn on your device (e.g. TV), then try the function keys on the Z-URC
your device (e.g. TV) responds to your activated function correctly, you have
entered the right Device Code. Otherwise, repeat the above steps with the
next available Device Codes until your device (e.g. TV) responds to your
activated function, and most keys work correctly.
* Simply repeat the above procedures to enter the Device Codes for your
SAT/CBL, DVD or AUX. (Remember to press the correct Device Mode Key
in step 2 above)
Note:
If the red indicator flashes 6 times in step 4, a wrong Device Code has
been entered. You are required to repeat step 2 to 4 again.
Suggestion :
- If you cannot find a correct Device Code for your equipment, see [SET
UP THE Z-URC
Library.
-
For future reference you are recommended to take note of your Devices
codes in the space provided in the manual after setting up the Z-URC
correctl
y.
By Searching Through the Library
If you cannot identify a correct Device Code for your equipment from the
Device Code list, you may search for the code in the library:-
1.
Turn on your device manually (e.g. TV).
2. Press a desired Device Mode Key (e.g. TV).
3. Hold down "CH +" and "VOL -" on the Z-URC
seconds until the indicator lights up.
4. Enter a corresponding Magic Search Code from the following table. The
green indicator flashes twice then goes out.
Device to be searched from code library
(e.g. press "TV" device mode key, then press "CH +" and "VOL -", and
enter TV Magic Search Code 0001.)
TM
TM
he Z-URC
simultaneously for 3
TM
FOR AV EQUIPMENT] - By Searching Through the
TM
simultaneously for 3
Magic Search Code
TV
0001
VCR
0002
SAT
0003
CTV
0004
DVD
0005
13
GB
T
M
. If
TM
Publicidad
Tabla de contenido
