Overall Dimensions - Perry DECRNN034 Instrucciones Para El Usuario

2 - OVERALL DIMENSIONS

121,5
3 - INSTALLATION GUIDELINES
Chronothermostat installation: independent-fixed
“
Wall mounting - in round box - semi-recessed in rectangular box
of 3 modules.
“
Install the device approximately 1.5 m off the ground well away
from sources of heat, windows and anything else that can affect
its normal state of operation.
!
4 - ATTACHING THE BASE TO THE WALL
“
Switch off mains power to device
“Using screws, attach the base to the wall, to the round or rectangular
built-in box using the appropriate pairs of holes . A
“
If the wall where the base of the chronothermostat is to be attached is
metal, insert the insulating washers into the two screws.
A - attachment holes
B - wire passage from round, rectangular box
31,5 26
C - chronothermostat attachment teeth
A
h 1,5 m
C
3 2 1
B 6 7 8 9
C
To ensure the chronothermostat is correctly fitted to the
base on the wall, it must not in any way be buckled due to
over tightening the screws fixing to the rectangular or
round box built into the wall.
A
15