Perry DECRNN034 Instrucciones Para El Usuario página 24

15 - TEMPERATURE SCALE °C or °F
ATTENTION:
the chronothermostat is preset to operate in
Celsius degrees and can be modified by the
installer or an expert user to function in
Fahrenheit degrees (°F).
G
F
Microswitch 4 on the back of the chronothermostat is default
B
set to the OFF position (Celsius degrees).
It can be moved to the ON
a RESET operation, will show room and Set temperature in
Fahrenheit degrees (°F).
To return to Celsius display, bring microswitch
position and perform a RESET operation.
In both cases, reprogramme the chronothermostat as
indicated in chapter 10).
ON
OFF = Celsius degrees (°c) range
1 2 3 4
ON
ON = Fahrenheit degrees (°F) range
1 2 3 4
24
position: the display,after performing
4 to the
(default setting)
16 - WARNINGS
“Please read this instruction booklet carefully and keep it for
future reference.
“The figures shown in the manual depict the display with
settings in C° (Celsius degrees).
“If the display shows an ambient temperature of
50,0 °C blinking, it means that
is off the scale.
“
Use only 1,5V AA alkaline batteries LR6 (not included in the
package ), using inappropriate batteries may cause the
entered programming to be lost.
OFF
N.B.: The product has been tested and it ensures its
characteristics with DURACELL or ENERGIZER alkaline
batteries.
“
Important: battery life may be more than 2 years. However,
it is recommended to replace them at least every 24
months to avoid them discharging when you are away (e.g.
Christmas holidays, etc.)
“
If necessary, clean the chronothermostat with
a slightly moist cloth.
“
The manufacturer reserves the right to make all technical
and manufacturing modifications deemed necessary
without prior notice.
00.0 °C or
the measured temperature