Turning The Denoptix Qst System On And Off - GENDEX DenOptix QST Manual Del Usuario Y De Servicio

Gendex DenOptix® QST
5.7

Turning the DenOptix QST system on and off

The DenOptix QST System is designed to be left on continuously. The laser is only operational
while the unit is actually scanning. If you wish to turn the system off, please remove the
carousel and use the following procedure.
1. Wait until any scan in progress is complete and the green light is on.
2. Save any changes you have made and close down the imaging software (for example
VixWin Pro software). To protect your data, frequently back-up your files.
3. Turn the power switch in the back of the scanner to the "Off" position.
4. Turn off all computer components following any instructions from the manufacturer.
If you live in an area of frequent thunderstorms or variable line voltages, you may want to
turn the unit off on a more regular basis. An uninterruptible power supply (UPS) is recom-
mended for areas with power quality issues.
38
Doc # M010-004WWE July 2005
User and Service Manual